Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT BELT
REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type 40 Side) - INSTALLATION
- HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart ().
1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH |
Install the belt with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
- NOTICE:
- Do not overlap the anchor part of the seat belt and protruding parts of the seat.
2. INSTALL REAR NO. 1 SEAT RECLINING COVER LH |
Attach the 4 claws to install the cover.
Install the 2 screws.
3. INSTALL REAR NO. 1 SEAT ASSEMBLY RH |
Install the rear No. 1 seat assembly ().