Lumbar Switch (For Power Seat) - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

LUMBAR SWITCH (for Power Seat) - INSTALLATION

  • CAUTION:
  • Wear protective gloves. Sharp areas on the parts may injure your hands.
  • HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. INSTALL LUMBAR SWITCH (for Driver Side)
Lumbar Switch (For Power Seat) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the switch with the 2 screws.

2. INSTALL FRONT SEAT CUSHION SHIELD LH

for Driver Side:


Connect the connector.

Lumbar Switch (For Power Seat) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.

Install the 3 screws.

Lumbar Switch (For Power Seat) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the 2 rubber bands.

Install the 2 screws.

3. INSTALL RECLINING POWER SEAT SWITCH KNOB
Lumbar Switch (For Power Seat) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the reclining power seat switch knob.

4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Lumbar Switch (For Power Seat) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the slide and vertical power seat switch knob.

5. INSTALL FRONT SEAT ASSEMBLY LH

Install the front seat assembly ().