Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
LUMBAR SWITCH (for Manual Seat) - INSPECTION
| 1. INSPECT LUMBAR SWITCH LH (for LHD) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 3 (B) - 4 (H) Hold Below 1 Ω 1 (R) - 2 (E2) 1 (R) - 2 (E2) Off 4 (H) - 5 (E2) 1 (R) - 3 (B) Release 4 (H) - 5 (E2)
If the result is not as specified, replace the lumbar switch.
| 2. INSPECT LUMBAR SWITCH RH (for RHD) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 3 (B) - 4 (H) Hold Below 1 Ω 1 (R) - 2 (E) 1 (R) - 2 (E) Off 4 (H) - 5 (E) 1 (R) - 3 (B) Release 4 (H) - 5 (E)
If the result is not as specified, replace the lumbar switch.