Knee Airbag Assembly (For Driver Side) - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUPPLEMENTAL RESTRAINT SYSTEMS

KNEE AIRBAG ASSEMBLY (for Driver Side) - INSTALLATION

  • HINT:
Use the same procedures for the RHD and LHD.
The procedures listed below are the LHD side.
1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY
Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connector.

  • NOTICE:
  • When handling the airbag connector, take care not to damage the airbag wire harness.

Install the driver side knee airbag with the 5 bolts.

  • Torque:
  • 10 N*m{ 102 kgf*cm, 7 ft.*lbf}
2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

Connect the connectors.

Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

for Automatic Air Conditioning System:

Attach the 2 claws to install the room temperature sensor.

Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to connect the 2 control cables.

w/ Driver Side Knee Airbag:

Attach the 16 claws to install the lower No. 1 instrument panel finish panel.

Install the 2 bolts.

Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/o Driver Side Knee Airbag:

Attach the 9 claws to install the lower No. 1 instrument panel finish panel.

Install the 2 bolts.

Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to close the hole cover.

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connectors.

Attach the 3 claws to install the No. 1 instrument panel under cover.

Install the 2 screws.

4. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

Attach the 2 claws to install the No. 2 instrument cluster finish panel garnish.

Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Text in Illustration
*Aw/ Entry and Start System*Bw/o Entry and Start System
5. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws to install the No. 1 instrument cluster finish panel garnish.

6. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connectors and attach the 2 clamps.

Attach the 8 claws to install the lower instrument panel pad sub-assembly.

Install the clip and screw.

7. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
Knee Airbag Assembly (For Driver Side) - Installation. SUPPLEMENTAL RESTRAINT SYSTEMS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
  • NOTICE:
  • When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
9. CHECK SRS WARNING LIGHT

Check the SRS warning light ().