Entry Lock And Unlock Switch (For Rear) - Inspection

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - THEFT DETERRENT / KEYLESS ENTRY

ENTRY LOCK AND UNLOCK SWITCH (for Rear) - INSPECTION

  • HINT:
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
1. INSPECT ENTRY LOCK AND UNLOCK SWITCH
Entry Lock And Unlock Switch (For Rear) - Inspection. THEFT DETERRENT / KEYLESS ENTRY. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Disconnect the connector.

Remove the outside handle.

Measure the resistance according to the value(s) in the table below.

  • Standard Resistance:
  • Tester ConnectionSwitch ConditionSpecified Condition
    1 (TRG-) - 3 (TRG+)Lock switch not pushed (OFF)10 kΩ or higher
    1 (TRG-) - 3 (TRG+)Lock switch pushed (ON)Below 1 Ω
If the result is not as specified, replace the entry lock and unlock switch.