Door Control Switch - Inspection

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK

DOOR CONTROL SWITCH - INSPECTION

1. INSPECT DOOR CONTROL SWITCH ASSEMBLY
Door Control Switch - Inspection. DOOR LOCK. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Measure the resistance according to the value(s) in the table below.

  • Standard Resistance:
  • Tester ConnectionSwitch ConditionSpecified Condition
    2 (UL) - 3 (E)UnlockBelow 1 Ω
    2 (UL) - 3 (E)Off10 kΩ or higher
    4 (L) - 3 (E)
    4 (L) - 3 (E)LockBelow 1 Ω
If the result is not as specified, replace the door control switch assembly.
Text in Illustration
*aUnlock
*bLock
*cComponent without harness connected
(Door Control Switch Assembly)
Door Control Switch - Inspection. DOOR LOCK. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Apply battery voltage to the switch connector and check that the indicator (LED) illuminates.

  • OK:
  • Measurement ConditionSpecified Condition
    Battery positive (+) → Terminal 1 (IG)
    Battery negative (-) → Terminal 3 (E)    		Indicator (LED) illuminates

If the result is not as specified, replace the door control switch assembly.

Text in Illustration
*aComponent without harness connected
(Door Control Switch Assembly)