REMOVE COOLER BRACKET

REMOVE MAGNET CLUTCH ASSEMBLY

Detach the clamp.

Remove the screw and the cooler bracket.

Clamp the cooler compressor in a vise.

Using SST, hold the magnet clutch hub.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

• HINT:

• There is no set number of magnet clutch washers since they are used for adjusting.

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

• NOTICE:

• Do not damage the seal cover of the bearing when removing the snap ring.

Disconnect the connector.

Using a snap ring expander, remove the snap ring and magnet clutch stator.