INSPECT SEAT HEATER SWITCH (w/ Seat Heater System)

INSPECT SEAT HEATER SWITCH (w/o Seat Heater System)

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:
• for LH Side:

• Tester Connection	Switch Condition	Specified Condition
  9 (VSL) - 12 (VGL)	COLD (HI) to HOT (HI)	6.0 to 0.06 kΩ

• Standard Resistance:
• for RH Side:

• Tester Connection	Switch Condition	Specified Condition
  3 (VSR) - 11 (VGR)	COLD (HI) to HOT (HI)	6.0 to 0.06 kΩ

• HINT:

• As the dial is being turned, the resistance changes gradually.

If the result is not as specified, replace the seat heater switch.

If the result is not as specified, replace the seat heater switch.

Apply battery voltage to the switch connector, and check that the seat heater switch illuminates.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → 7 (ILL+) Battery negative (-) → 5 (ILL-)	Illuminates

If the result is not as specified, replace the seat heater switch.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:
• for LH Side:

• Tester Connection	Switch Condition	Specified Condition
  9 (VSL) - 12 (VGL)	ON (MIN) to ON (MAX)	6.0 to 0.06 kΩ

• Standard Resistance:
• for RH Side:

• Tester Connection	Switch Condition	Specified Condition
  3 (VSR) - 11 (VGR)	ON (MIN) to ON (MAX)	6.0 to 0.06 kΩ

• HINT:

• As the dial is being turned, the resistance changes gradually.

If the result is not as specified, replace the seat heater switch.

Apply battery voltage to the switch connector, and check that the seat heater switch illuminates.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → 8 (ILL+) Battery negative (-) → 5 (ILL-)	Illuminates

If the result is not as specified, replace the seat heater switch.