Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
BACK DOOR LOCK - REMOVAL
| 1. REMOVE CENTER BACK DOOR GARNISH |
Detach the 5 clips and 4 claws, and remove the center back door garnish.
| 2. REMOVE BACK DOOR SIDE GARNISH LH |
Detach the 3 clips and 2 claws, and remove the back door side garnish LH.
| 3. REMOVE BACK DOOR SIDE GARNISH RH |
w/o Power Back Door:
- HINT:
- Use the same procedure described for the LH side.
w/ Power Back Door:
Detach the clip and 4 claws, and remove the back door side garnish RH.
| 4. REMOVE ASSIST GRIP (for Face to Face Seat Type) |
Remove the 2 screws and assist grip.
| 5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type) |
Using a screwdriver, detach the 4 claws and remove the No. 2 back door service hole cover.
Disconnect connector.
| 6. REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type) |
Detach the 2 claws and remove the door opening switch sub-assembly.
| 7. REMOVE BACK DOOR GARNISH |
Using a screwdriver, detach the 14 clips and remove the back door garnish.
- HINT:
- Tape the screwdriver tip before use.
| 8. REMOVE REAR ASSIST GRIP REINFORCEMENT (for Face to Face Seat Type) |
Remove the 3 bolts.
Detach the 2 claws and remove the rear assist grip reinforcement.
| 9. REMOVE BACK DOOR LOCK COVER |
Detach the 4 claws and remove the back door lock cover.
| 10. REMOVE BACK DOOR LOCK ASSEMBLY |
w/o Power Back Door:
Disconnect the connector.
Remove the 3 bolts and back door lock assembly.
w/ Power Back Door:
Disconnect the connector.
Detach the guide.
Remove the 4 bolts and back door lock assembly.
| 11. REMOVE BACK DOOR LOCK PROTECTOR (w/ Power Back Door) |
Remove the screw.
Detach the 7 claws, and remove the protector (B).
| *1 | Protector (B) |
Detach the 2 claws, and remove the protector (A).
| *1 | Protector (A) |