Air Conditioning System (For Automatic Air Conditioning System) - Check Mode Procedure

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - HEATING / AIR CONDITIONING


AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) - CHECK MODE PROCEDURE

LIST OF OPERATION METHODS

By operating each of the air conditioning control switches as shown in the diagram below, it is possible to enter the diagnostic check mode.

  • HINT:
Use the same procedures for the LHD vehicle and RHD vehicle.
The procedures listed below are for the LHD vehicle.

Air Conditioning System (For Automatic Air Conditioning System) - Check Mode Procedure. HEATING / AIR CONDITIONING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

INDICATOR CHECK
Air Conditioning System (For Automatic Air Conditioning System) - Check Mode Procedure. HEATING / AIR CONDITIONING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Turn the engine switch off.

Turn the engine switch on (ACC) and wait at least 5 seconds.

  • HINT:
  • Vehicle with Navigation System only.

Turn the engine switch on (IG) while pressing the A/C control panel "AUTO" switch and "Recirculation/ Fresh" switch simultaneously.


Hold both switches until the indicator check screen appears.

Text in Illustration
*Aw/ Navigation System
*Bw/o Navigation System
Air Conditioning System (For Automatic Air Conditioning System) - Check Mode Procedure. HEATING / AIR CONDITIONING. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Check that all indicators turn on and off 4 times in succession at 1 second intervals.

  • HINT:
After the indicator check is completed, the system enters the DTC mode automatically.
Press the "OFF" switch to cancel the indicator check.