Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER
WIPER AND WASHER SYSTEM (w/o Rain Sensor) - DATA LIST / ACTIVE TEST
| PERFORM ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Warm up the engine.
Turn the ignition switch off.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / (desired system) / Active Test.
According to the display on the intelligent tester. perform the "Active Test".
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Head Light Cleaner | Headlight low beam signal | ON / OFF | - |
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Front Washer Nozzle Heater | Washer nozzle heater operation | ON / OFF | - |