Window Defogger System (For Double Swing Out Type) - How To Proceed With Troubleshooting
WINDOW DEFOGGER SYSTEM (for Double Swing Out Type) - HOW TO PROCEED WITH TROUBLESHOOTING
Use these procedures to troubleshoot the window defogger system.
*: Use the intelligent tester.
1.VEHICLE BROUGHT TO WORKSHOP |
2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
3.CHECK LIN COMMUNICATION SYSTEM |
Check if the LIN communication system is functioning normally ().
- OK:
- LIN DTC is not output.
| GO TO LIN COMMUNICATION SYSTEM () |
|
|
Refer to the Problem Symptoms Table ().
ResultResult | Proceed to |
Fault is not listed in problem symptoms table | A |
Fault is listed in problem symptoms table | B |
| ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE |
|
|
5.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Data List / Active Test ().