Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER
WASHER NOZZLE (for Rear Side) - ON-VEHICLE INSPECTION
1. INSPECT REAR WASHER NOZZLE |
With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.
- Standard:
- Washer fluid hits the windshield in the area shown in the illustration.
If the result is not as specified, replace the washer nozzle.
- Standard Measurement:
Area Specified Condition A 65.8 mm (2.59 in.) B 40.5 mm (1.59 in.) C 44.9 mm (1.77 in.)
If the result is not as specified, replace the rear washer nozzle.