Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER

WASHER NOZZLE (for Front Side) - ON-VEHICLE INSPECTION

  • HINT:
Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
1. INSPECT WASHER NOZZLE SUB-ASSEMBLY

With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

  • Standard:
  • Washer fluid hits the windshield in the area shown in the illustration.

If the result is not as specified, replace the washer nozzle.


Washer Nozzle (For Front Side) - On-Vehicle Inspection. WIPER / WASHER. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

  • Standard Measurement:
  • AreaSpecified Condition
    A253.2 mm (9.97 in.)
    B41.4 mm (1.63 in.)
    C192.9 mm (7.59 in.)
    D444.0 mm (17.48 in.)
WIPER / WASHER
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
WASHER NOZZLE for Front Side