Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM
SIDE STEP (w/ Foot light) - REMOVAL
- HINT:
Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
| 1. REMOVE HEIGHT CONTROL PROTECTOR PIPE |
Remove the 6 bolts and protector pipe.
| 2. REMOVE FRONT FENDER MUDGUARD LH |
Remove the clip.
Using a T30 "TORX" socket wrench, remove the 4 screws and front fender mudguard LH.
| 3. REMOVE SIDE STEP ASSEMBLY |
Remove the screw and 6 bolts.
Disconnect the connector.
Detach the 10 clips and remove the double-sided tape to remove the side step assembly.
| *1 | Double-sided Tape | - | - |