Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM
ROOF CARRIER - INSTALLATION
| 1. INSTALL ROOF CARRIER SUB-ASSEMBLY LH |
Clean the threaded surface on the vehicle body with a non-residue solvent.
Apply adhesive to the threads of the 5 bolts.
- Adhesive:
- Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Install the roof carrier with the 5 bolts.
- Torque:
- 39 N*m{ 398 kgf*cm, 29 ft.*lbf}
| 2. INSTALL ROOF CARRIER SUB-ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 3. INSTALL REAR ROOF RACK LEG COVER LH |
Attach the 2 guides and 2 clips to install the cover.
| 4. INSTALL REAR ROOF RACK LEG COVER RH |
- HINT:
- Use the same procedures described for the LH side.
| 5. INSTALL CENTER ROOF RACK LEG COVER LH |
Attach the 2 claws to install the cover.
| 6. INSTALL CENTER ROOF RACK LEG COVER RH |
- HINT:
- Use the same procedures described for the LH side.
| 7. INSTALL FRONT ROOF RACK LEG COVER LH |
Attach the 2 guides and 2 clips to install the cover.
| 8. INSTALL FRONT ROOF RACK LEG COVER RH |
- HINT:
- Use the same procedures described for the LH side.