Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER
REAR WIPER RUBBER - REMOVAL
| 1. REMOVE REAR WIPER BLADE |
Raise the rear wiper blade to the position shown in the illustration until the meshing of the claw disengages with a clicking sound.
- NOTICE:
- Be careful not to break the claw.
Pull the rear wiper blade straight away from the wiper arm toward the left side of the vehicle.
- NOTICE:
- Do not bend the rear wiper arm with the rear wiper blade removed, as the arm tip could damage the windshield surface.
| 2. REMOVE REAR WIPER RUBBER |
Pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration and remove it.
- NOTICE:
- Do not pull out the wiper rubber forcibly. Otherwise, the backing plates will be deformed or the blade claw will be damaged.
- HINT:
- Pushing the rubber as shown in the illustration will allow it to be removed more easily.
Remove the 2 wiper rubber backing plates from the wiper rubber.