Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER

REAR WIPER RUBBER - INSTALLATION

1. INSTALL REAR WIPER RUBBER
Rear Wiper Rubber - Installation. WIPER / WASHER. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Install the rear wiper rubber to the 2 rear wiper rubber backing plates.

  • NOTICE:
  • Install the backing plates in the correct direction.
Rear Wiper Rubber - Installation. WIPER / WASHER. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Insert the rear wiper rubber from the claw position of the middle of the rear wiper blade to the end.

Rear Wiper Rubber - Installation. WIPER / WASHER. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

After passing the rear wiper rubber through the rear end side claw, allow it to stick out from the rear end stopper and slide it through the front tip side claw.

2. INSTALL REAR WIPER BLADE

Hold the wiper blade at the same angle it was removed at and attach the claw to install it.