Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER
REAR WIPER MOTOR (for Double Swing Out Type) - ON-VEHICLE INSPECTION
1. INSPECT REAR WIPER MOTOR ASSEMBLY |
Operate the rear wiper motor assembly.
Stop the rear wiper motor assembly operation.
Check the automatic stop position.
- Standard Clearance:
Area Specified Condition A 55 to 75 mm (2.17 to 2.95 in.)
*1 | Back Door Glass Edge |
- HINT:
- After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.