Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WIPER / WASHER
REAR WIPER MOTOR (for Double Swing Out Type) - REMOVAL
1. REMOVE ASSIST GRIP RH |
Using a screwdriver, detach the 2 claws and open the 2 covers.
- HINT:
- Tape the screwdriver tip before use.
*1 | Protective Tape |
Remove the 2 bolts and assist grip.
2. REMOVE BACK DOOR TRIM COVER RH |
Detach the 5 clips and 2 claws.
Detach the clamp and 2 claws and remove the back door trim cover.
3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY RH |
Detach the 13 clips and remove the back door trim panel.
4. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY |
Open the wiper arm head cap.
Remove the nut and remove the rear wiper arm and blade assembly.
5. REMOVE REAR WIPER MOTOR ASSEMBLY |
Disconnect the connector.
Remove the 3 bolts and rear wiper motor assembly.
6. REMOVE REAR WIPER MOTOR GROMMET |
Remove the rear wiper motor grommet.