Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT

REAR COMBINATION LIGHT ASSEMBLY (for Double Swing Out Type) - REMOVAL

  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
Rear Combination Light Assembly (For Double Swing Out Type) - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Put protective tape around the rear combination light assembly LH.

Text in Illustration
*1Protective tape

Remove the 2 bolts.

Detach the 3 clips, 2 guides and 2 claws.

  • NOTICE:
  • Detach the bolt installation bracket from inside the body while being careful not to bend it.

Disconnect the connector to remove the rear combination light assembly.

2. REMOVE REAR TURN SIGNAL LIGHT BULB
Rear Combination Light Assembly (For Double Swing Out Type) - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration and remove the socket.

Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly LH.

3. REMOVE TAIL AND STOP LIGHT BULB
Rear Combination Light Assembly (For Double Swing Out Type) - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow in the illustration and remove the socket.

Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly LH.

4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH
Rear Combination Light Assembly (For Double Swing Out Type) - Removal. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using a screwdriver, detach the claw.

Detach the 2 guide and remove the rear combination light socket and wire sub-assembly LH.

LIGHTING EXT
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
REAR COMBINATION LIGHT ASSEMBLY for Double Swing Out Type