Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM

REAR BUMPER (for Double Swing Out Type) - REMOVAL

1. REMOVE SPARE WHEEL CARRIER HINGE BRACKET (w/ Tire Carrier)
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws and remove the spare wheel carrier hinge bracket.

2. REMOVE SPARE WHEEL COVER SUB-ASSEMBLY (w/ Tire Carrier)
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 nuts.

Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the clip and remove the spare wheel cover.

3. REMOVE SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier)

Remove the 3 bolts and spare tire.

Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 9 bolts and spare wheel carrier.

4. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

For vehicles with a spare tire installed to the underbody, remove the spare tire.

Text in Illustration
*1Eyelet Pintle Hook
*2Pintle Hook Bracket

Remove the 4 nuts.

Remove the 2 bolts, 2 eyelet pintle hooks, pintle hook assembly and pintle hook bracket.

5. REMOVE REAR QUARTER PANEL MUDGUARD LH
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the clip.

Using a T30 "TORX" socket, remove the 6 screws and mudguard.

6. REMOVE REAR QUARTER PANEL MUDGUARD RH
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the clip.

Using a T30 "TORX" socket, remove the 7 screws and mudguard.

7. REMOVE REAR BUMPER NO. 1 PLATE
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Put protective tape around the rear bumper No. 1 plate.

Text in Illustration
*1Protective Tape
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 20 claws and remove the rear bumper No. 1 plate.

8. REMOVE REAR BUMPER COVER
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 6 screws, 2 clips and 2 bolts.

Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 clips and 5 bolts.

Put protective tape around the rear bumper cover.

Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Text in Illustration
*1Protective Tape--

Open the back doors one notch.

Disconnect the No. 2 frame wire connector.

Detach the 14 claws and remove the rear bumper cover.

Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

9. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Put protective tape around the rear combination light assembly LH.

Text in Illustration
*1Protective tape

Remove the 2 bolts.

Detach the 3 clips, 2 guides and 2 claws.

  • NOTICE:
  • Detach the bolt installation bracket from inside the body while being careful not to bend it.

Disconnect the connector to remove the rear combination light assembly.

10. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH
  • HINT:
  • Use the same procedure described for the LH side.
11. REMOVE REAR BUMPER UPPER RETAINER LH
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 clips and remove the rear bumper upper retainer.

12. REMOVE REAR BUMPER UPPER RETAINER RH
  • HINT:
  • Use the same procedure described for the LH side.
13. REMOVE REAR BUMPER SIDE SUPPORT LH
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 3 screws.

Detach the 6 claws and remove the rear bumper side support.

14. REMOVE REAR BUMPER SIDE SUPPORT RH
  • HINT:
  • Use the same procedure described for the LH side.
15. REMOVE REAR BUMPER NO. 2 REINFORCEMENT
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 bolts and rear bumper No. 2 reinforcement.

16. REMOVE REAR BUMPER ARM BRACKET
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200
  • HINT:
  • Use the same procedure for both rear bumper arm brackets.

Remove the bolt and rear bumper arm bracket.

17. REMOVE REAR BUMPER ARM BRACKET LH
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the clamp.

Remove the 2 bolts and nut and remove the rear bumper arm bracket.

18. REMOVE NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
Rear Bumper (For Double Swing Out Type) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws, 2 grommets and No. 2 luggage compartment side cover protector.

19. REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
  • HINT:
  • Use the same procedure described for the No. 2 luggage compartment side cover protector.
EXTERIOR PANELS / TRIM
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
REAR BUMPER for Double Swing Out Type