POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) - CUSTOMIZE PARAMETERS

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) (w/ REMOTE FUNCTION)

When the customer requests a change in a function, first make sure the function(s) can be customized.

Be sure to make note of the current settings before customizing.

When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the intelligent tester to the DLC3.

Turn the ignition switch ON.

Turn the intelligent tester on.

Enter the following menus: Utility / Customize Setting / Power Window.

Select the setting by referring to the table below.

Power Window
Display (Item)	Default	Contents	Setting
Door Key P/W Up	OFF	Function that raises all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 seconds	ON/OFF
Door Key P/W Down	OFF	Function that lowers all the power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 seconds	ON/OFF
P/W Up W/ Transmit	OFF	Function that raises all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 seconds	ON/OFF
P/W Down W/ Transmit	OFF	Function that lowers all the power windows when, with the ignition switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 seconds	ON/OFF
P/W Up W/ Smart	OFF	Function that raises all the power windows when, with the ignition switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 seconds	ON/OFF