Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WINDOW / GLASS


POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) - OPERATION CHECK

CHECK WINDOW LOCK SWITCH
Power Window Control System (For Models With Jam Protection Function On 4 Windows) - Operation Check. WINDOW / GLASS. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Press the window lock switch of the multiplex network master switch assembly.

  • HINT:
  • The illumination (LED) built into the switch knob of each seat does not turn off.

Check that the power window for each seat except the driver seat can no longer be operated.

Check that the power window for each seat cannot be operated from the driver seat.

Press the window lock switch of the multiplex network master switch assembly again.

Check that the power window for each seat except the driver seat can be operated.

Check that the power window for each seat can be operated from the driver seat.

CHECK MANUAL UP/DOWN FUNCTION

Check that the driver side power window operates as follows:

OK
ConditionMultiplex Network Master SwitchSwitch OperationPower Window
Ignition switch ONDriver sidePulled halfway upUp (Closes)
Pushed halfway downDown (Opens)

Check that the front passenger side and rear power windows operate as follows:

OK
ConditionPower Window Regulator SwitchSwitch OperationPower Window
Ignition switch ON
Window lock switch off
Front passenger sidePulled halfway upUp (Closes)
Pushed halfway downDown (Opens)
Rear LH sidePulled halfway upUp (Closes)
Pushed halfway downDown (Opens)
Rear RH sidePulled halfway upUp (Closes)
Pushed halfway downDown (Opens)
CHECK AUTO UP/DOWN FUNCTION

Check that the driver side power window operates as follows:

OK
ConditionMultiplex Network Master SwitchSwitch OperationPower Window
Ignition switch ONDriver sidePulled up (One touch operation)Auto up (Closes)
Pushed down (One touch operation)Auto down (Opens)

Check that the front passenger side and rear power windows operate as follows:

OK
ConditionPower Window Regulator SwitchSwitch OperationPower Window
Ignition switch ON
Window lock switch off
Front passenger sidePulled up (One touch operation)Auto up (Closes)
Pushed down (One touch operation)Auto down (Opens)
Rear LH sidePulled up (One touch operation)Auto up (Closes)
Pushed down (One touch operation)Auto down (Opens)
Rear RH sidePulled up (One touch operation)Auto up (Closes)
Pushed down (One touch operation)Auto down (Opens)
CHECK REMOTE MANUAL UP/DOWN FUNCTION

Check that the front passenger side and rear power windows operate as follows:

OK
ConditionMultiplex Network Master SwitchSwitch OperationPower Window
Ignition switch ON
Window lock switch off
Front passenger sidePulled halfway upUp (Closes)
Pushed halfway downDown (Opens)
Rear LH sidePulled halfway upUp (Closes)
Pushed halfway downDown (Opens)
Rear RH sidePulled halfway upUp (Closes)
Pushed halfway downDown (Opens)
CHECK REMOTE AUTO UP/DOWN FUNCTION

Check that the front passenger side and rear power windows operate as follows:

OK
ConditionMultiplex Network Master SwitchSwitch OperationPower Window
Ignition switch ON
Window lock switch off
Front passenger sidePulled up (One touch operation)Auto up (Closes)
Pushed down (One touch operation)Auto down (Opens)
Rear LH sidePulled up (One touch operation)Auto up (Closes)
Pushed down (One touch operation)Auto down (Opens)
Rear RH sidePulled up (One touch operation)Auto up (Closes)
Pushed down (One touch operation)Auto down (Opens)
CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF

Check that all the power windows can be operated with the multiplex network master switch after the ignition switch is turned off.

Check that the key-off operation function does not operate after a front side door is opened.

Check that all the power windows cannot be operated after more than approximately 45 seconds have elapsed since the ignition switch was turned off.

CHECK TRANSMITTER-LINKED FUNCTION

Check that all power windows operate as follows when operating the transmitter.

OK
ConditionTransmitter OperationPower Window
No key is inside vehicle, and all doors are closed and locked.Unlock switch pressed for more than 3.0 seconds.Down (Opens)
No key is inside vehicle, and all doors are closed and locked.Unlock switch released.Stop
CHECK KEY-LINKED FUNCTION USING DRIVER SIDE DOOR KEY CYLINDER

Check that all power windows operate as follows.

OK
ConditionDoor Key Cylinder OperationPower Window
No key is inside vehicle, and all doors are closed.Turned to lock for more than 2.3 seconds.Up (Closes)
No key is inside vehicle, and all doors are closed.Returned to neutral position.Stop
No key is inside vehicle, and all doors are closed.Turned to unlock for more than 2.3 seconds.Down (Opens)
No key is inside vehicle, and all doors are closed.Returned to neutral position.Stop
CHECK AUTO UP FUNCTION USING ENTRY LOCK SWITCH (w/ Entry and Start System)

Check that all power windows operate as follows when the entry lock switch is pressed and held.

OK
ConditionSwitch OperationPower Window
No key is inside vehicle, and all doors are closed.Entry lock switch pressed for more than 3.0 seconds.Up (Closes)
No key is inside vehicle, and all doors are closed.Entry lock switch released.Stop
CHECK JAM PROTECTION FUNCTION

Check the basic function.

  • CAUTION:
The jam protection function is operative during both the auto up and manual up operation.
Do not put your fingers between the door frame and door glass to check functions. Also, prevent any part of your body from being caught during inspection.
  • HINT:
  • The jam protection function is operative during both the auto up and manual up operation while the engine is running or the ignition switch is ON, and also 45 seconds after the ignition switch is off.

Fully open the window.

Power Window Control System (For Models With Jam Protection Function On 4 Windows) - Operation Check. WINDOW / GLASS. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Hold a thick book wrapped with cloth in the position shown in the illustration.

Operate the auto up or manual up function to check that the power window goes down when the window contacts the book, and stops when the opening reaches approximately 200 mm (7.87 in.).

  • HINT:
  • The power window moves down approximately 125 mm (4.93 in.). However, when the opening does not reach 200 mm (7.87 in.), the power window continues to go down until the opening reaches 200 mm (7.87 in.) or until approximately 5 seconds have elapsed.

While the power window is moving down, check that the door glass cannot be moved up even when the power window regulator switch is used.

CHECK POWER WINDOW REGULATOR SWITCH LED ILLUMINATION

When the ignition switch is turned from off to ON with the connectors connected, check that the illumination (LED) on the switch portion of the power window regulator switch assembly turns on.

Power Window Control System (For Models With Jam Protection Function On 4 Windows) - Operation Check. WINDOW / GLASS. Land Cruiser URJ200  URJ202 GRJ200 VDJ200