Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WINDOW / GLASS


POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Driver Door Window Only) - FAIL-SAFE CHART

POWER WINDOW OPERATION IN FAIL-SAFE MODE
  • HINT:
  • If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode.

The pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.

  • HINT:
  • The power window control system prohibits the following power window operations when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.
Multiplex Network Master Switch
Power Window OperationCondition
Ignition Switch ONIgnition Switch off
(Key-off operation permitted)		Ignition Switch off
(Key-off operation prohibited)
Manual up (Driver side door window)XX-
Manual down (Driver side door window)○*1X-
Auto up (Driver side door window)
(hold switch at auto up position)		○*2X-
Auto up (Driver side door window)XX-
Auto down (Driver side door window)XX-
Manual up (Remote switch operation)XX-
Manual down (Remote switch operation)XX-
Auto up (Remote switch operation)
(hold switch at auto up position)		XX-
Auto up (Remote switch operation)XX-
Auto down (Remote switch operation)XX-
  • HINT:
○: Operative
X: Operation prohibited
*1: Jam protection not operative
*2: In manual mode and jam protection not operative

Power window switch LED control

  • HINT:
  • During normal operation (fail-safe is not operating), or during fail-safe mode when there is a pulse sensor malfunction or the window position or learned value is abnormal, the LED illuminates as shown in the illustration.
for driver side:

Power Window Control System (For Models With Jam Protection Function On Driver Door Window Only) - Fail-Safe Chart. WINDOW / GLASS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Fail-safe Deactivation Condition

When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the window from the fully open position. As a result, the auto up/down function will return.

Initialization failure

  • HINT:
  • During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM, the power window control system prohibits the following operations.
Multiplex Network Master Switch
Power Window OperationCondition
Ignition Switch ONIgnition Switch off
(Key-off operation permitted)		Ignition Switch off
(Key-off operation prohibited)
Manual up (Driver side door window)XX-
Manual down (Driver side door window)○*1X-
Auto up (Driver side door window)
(hold switch at auto up position)		○*2X-
Auto up (Driver side door window)XX-
Auto down (Driver side door window)XX-
Manual up (Remote switch operation)XX-
Manual down (Remote switch operation)XX-
Auto up (Remote switch operation)
(hold switch at auto up position)		XX-
Auto up (Remote switch operation)XX-
Auto down (Remote switch operation)XX-
  • HINT:
○: Operative
X: Operation prohibited
*1: Jam protection not operative
*2: In manual mode and jam protection not operative

Power window switch LED control

  • HINT:
  • During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM during fail-safe mode, the LED illuminates as shown in the illustration.
for driver side:

Power Window Control System (For Models With Jam Protection Function On Driver Door Window Only) - Fail-Safe Chart. WINDOW / GLASS. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

LIN communication failure

  • HINT:
  • If the LIN communication line malfunctions (communication stop), the power window control system prohibits the following operations.
Multiplex Network Master Switch
Power Window OperationIgnition Switch ON
Manual up○*1
Manual down○*2
Auto up (hold switch at auto up position)○*1
Auto up○*1
Auto down○*2
  • HINT:
○: Operative
X: Operation prohibited
*1: Jam protection operative
*2: Jam protection not operative
Remote up/down function does not operate.

LIN communication failure and pulse sensor failure

  • HINT:
  • If the LIN communication line malfunctions (communication stop) and the pulse sensor for the jam protection function has problems, the power window control system prohibits the following operations.
Multiplex Network Master Switch
Power Window OperationAlways
Manual upX
Manual downX
Auto up (hold switch at auto up position)X
Auto upX
Auto downX
  • HINT:
○: Operative
X: Operation prohibited
Driver side door window: When there is no jam protection control due to a LIN communication failure, the manual up and auto up functions will not operate.
Remote switch operation: Not operative during LIN communication failure.

LIN communication failure and window position, learned value abnormal or initialization failure

  • HINT:
  • If the LIN communication line malfunctions (communication stop) and the window position or the learned value is abnormal, the power window control system prohibits the following operations.
Multiplex Network Master Switch
Power Window OperationAlways
Manual up○*1
Manual down○*2
Auto up (hold switch at auto up position)○*1
Auto up-
Auto down-
  • HINT:
○: Operative
*1: Jam protection operative and window reverses direction upon reaching the fully closed position
*2: Jam protection not operative
Remote switch operation: Operation is not possible during a LIN communication failure.
WINDOW / GLASS
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
POWER WINDOW CONTROL SYSTEM for Models with Jam Protection Function on Driver Door Window Only