DESCRIPTION
INSPECTION PROCEDURE
CHECK BASIC FUNCTION (ENTRY AND START SYSTEM (for Entry Function))
POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) - All Power Window Up Functions do not Operate with Entry Lock Switch
DESCRIPTION
When an entry lock switch is pressed and held for approximately 3 seconds: 1) the main body ECU receives a signal via the driver side door ECU, 2) the main body ECU transmits a signal to all the power window regulator motor, and 3) all the power window motors are activated to close the windows.
INSPECTION PROCEDURE
| 1.CHECK BASIC FUNCTION (ENTRY AND START SYSTEM (for Entry Function)) |
Check that the entry lock switch operates ().
- OK:
- Entry lock switch can lock all the doors.
| | GO TO ENTRY AND START SYSTEM (for Entry Function) ()
|
|
|
| OK | |
| |
| REPLACE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) |
|