DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK LIN COMMUNICATION SYSTEM
CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (WINDOW LOCK SWITCH)
POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) - Remote Up / Down Function does not Operate
DESCRIPTION
When the ignition switch is ON and window lock switch is off, the multiplex network master switch sends remote up/down signals to each power window regulator motor via the LIN communication line.
WIRING DIAGRAM
INSPECTION PROCEDURE
1.CHECK LIN COMMUNICATION SYSTEM |
Check for LIN communication system DTCs related to the power window control system ().
- OK:
- LIN communication system DTCs are not output.
| GO TO LIN COMMUNICATION SYSTEM ()
|
|
|
2.CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (WINDOW LOCK SWITCH) |
Turn the window lock switch off and operate the switches on the multiplex network master switch. Check that the remote up/down function operates ().
- OK:
- Remote up/down function operates.
| REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY ()
|
|
|