Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - MIRROR EXT
OUTER REAR VIEW MIRROR - INSTALLATION
- HINT:
| 1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY |
Attach the claw and Install the mirror with the 3 nuts.
- Torque:
- 8.0 N*m{ 82 kgf*cm, 71 in.*lbf}
w/ Power Mirror Control System:
Attach the clamp.
Connect the connector labeled A.
| 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
Connect the connector.
Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH to the front door inside handle sub-assembly LH.
Attach the 4 claws and 13 clips to install the front door trim board sub-assembly LH.
Install the 3 screws.
| 3. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH |
Attach the clip and claw, and install the front door lower frame bracket garnish LH.
| 4. INSTALL DOOR ASSIST GRIP COVER |
Attach the 8 claws to install the door assist grip cover LH to the front door trim board sub-assembly LH.
| 5. INSTALL FRONT UPPER ARMREST BASE PANEL LH |
Connect the connector.
Attach the 5 claws to install the armrest base panel.
| 6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL |
Attach the 4 claws to install the front door inside handle bezel LH.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().