REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

REMOVE NO. 1 SWITCH HOLE BASE

REMOVE OUTER MIRROR SWITCH ASSEMBLY

REMOVE RETRACTABLE OUTER MIRROR SWITCH (w/ Retract Mirror)

Put protective tape around the No. 2 instrument panel finish panel cushion.

Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.

Remove the clip and screw.

Detach the 8 claws.

Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.

Remove the 2 screws.

Detach the 3 claws.

Disconnect the connectors and remove the No. 1 instrument panel under cover.

Using a screwdriver, detach the 2 claws and open the hole cover.

• HINT:

• Tape the screwdriver tip before use.

w/ Driver Side Knee Airbag:

w/o Driver Side Knee Airbag:

for Automatic Air Conditioning System:

Detach the 2 claws and disconnect the 2 control cables.

Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.

Detach the 4 claws.

Disconnect the connectors and remove the No. 1 switch hole cover.

Using a screwdriver, detach the 4 claws and remove the switch.

• HINT:

• Tape the screwdriver tip before use.

Using a screwdriver, detach the 2 claws and remove the switch.

• HINT:

• Tape the screwdriver tip before use.