Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - MIRROR EXT
OUTER MIRROR SWITCH - INSPECTION
| 1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror) |
Inspect the outer mirror switch assembly.
Select "L" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 (MLV) - 4 (B)
7 (M+) - 8 (E)Up Pressed Below 1 Ω Not pressed 10 kΩ or higher 3 (MLV) - 8 (E)
7 (M+) - 4 (B)Down Pressed Below 1 Ω Not pressed 10 kΩ or higher 9 (MLH) - 4 (B)
7 (M+) - 8 (E)Left Pressed Below 1 Ω Not pressed 10 kΩ or higher 9 (MLH) - 8 (E)
7 (M+) - 4 (B)Right Pressed Below 1 Ω Not pressed 10 kΩ or higher
If the result is not as specified, replace the outer mirror switch assembly.
Select "R" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 2 (MRV) - 4 (B)
7 (M+) - 8 (E)Up Pressed Below 1 Ω Not pressed 10 kΩ or higher 2 (MRV) - 8 (E)
7 (M+) - 4 (B)Down Pressed Below 1 Ω Not pressed 10 kΩ or higher 10 (MRH) - 4 (B)
7 (M+) - 8 (E)Left Pressed Below 1 Ω Not pressed 10 kΩ or higher 10 (MRH) - 8 (E)
7 (M+) - 4 (B)Right Pressed Below 1 Ω Not pressed 10 kΩ or higher
If the result is not as specified, replace the outer mirror switch assembly.
Inspect the switch illumination.
Apply battery voltage between the terminals of the light, and check the operation of the light.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 5 (ILL+)
Battery negative (-) → Terminal 6 (ILL-)Light comes on
If the result is not as specified, replace the outer mirror switch assembly.
| 2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror) |
Inspect the outer mirror switch assembly.
Select "L" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 8 (MSW) - 9 (E) L switch L position 10 kΩ or higher Neutral position 10 kΩ or higher 7 (M+) - 9 (E) Up Pressed 95 to 105 Ω Not pressed 10 kΩ or higher 7 (M+) - 9 (E) Down Pressed 446 to 493 Ω Not pressed 10 kΩ or higher 7 (M+) - 9 (E) Left Pressed 760 to 840 Ω Not pressed 10 kΩ or higher 7 (M+) - 9 (E) Right Pressed 237 to 262 Ω Not pressed 10 kΩ or higher
If the result is not as specified, replace the outer mirror switch assembly.
Select "R" on the left/right adjustment switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 8 (MSW) - 9 (E) R switch R position Below 1 Ω Neutral position 10 kΩ or higher 7 (M+) - 9 (E) Up Pressed 95 to 105 Ω Not pressed 10 kΩ or higher 7 (M+) - 9 (E) Down Pressed 446 to 493 Ω Not pressed 10 kΩ or higher 7 (M+) - 9 (E) Left Pressed 760 to 840 Ω Not pressed 10 kΩ or higher 7 (M+) - 9 (E) Right Pressed 237 to 262 Ω Not pressed 10 kΩ or higher
If the result is not as specified, replace the outer mirror switch assembly.
Inspect the switch illumination.
Apply battery voltage between the terminals of the light, and check the operation of the light.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 5 (ILL+)
Battery negative (-) → Terminal 6 (ILL-)Light comes on
If the result is not as specified, replace the outer mirror switch assembly.
| 3. INSPECT RETRACTABLE OUTER MIRROR SWITCH (w/ Retract Mirror) |
Inspect the retractable outer mirror switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 5 (E) - 6 (MR) Pressed
(Retracts)Below 1 Ω Not pressed 10 kΩ or higher
If the result is not as specified, replace the retractable outer mirror switch.
Inspect the switch illumination.
Apply battery voltage between the terminals of the light, and check the operation of the light.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 8 (ILL+)
Battery negative (-) → Terminal 7 (ILL-)Light comes on
If the result is not as specified, replace the retractable outer mirror switch.