Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM
MUDGUARD (w/ Foot light) - REMOVAL
| 1. REMOVE FRONT FENDER MUDGUARD LH |
Remove the clip.
Using a T30 "TORX" socket wrench, remove the 4 screws and front fender mudguard LH.
| 2. REMOVE FRONT FENDER MUDGUARD RH |
- HINT:
- Use the same procedures described for the LH side.
| 3. REMOVE REAR QUARTER PANEL MUDGUARD LH |
Remove the clip.
Using a T30 "TORX" socket wrench, remove the 6 screws and rear quarter panel mudguard LH.
| 4. REMOVE REAR QUARTER PANEL MUDGUARD RH |
Remove the clip.
Using a T30 "TORX" socket wrench, remove the 7 screws and rear quarter panel mudguard RH.