INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LH Side)

INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RH Side)

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  20 (H) - 12 (EL)	Light control switch off	10 kΩ or higher
  18 (T) - 12 (EL)
  18 (T) - 12 (EL)	Light control switch tail	Below 1 Ω
  18 (T) - 12 (EL)	Light control switch head	Below 1 Ω
  20 (H) - 12 (EL)

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  17 (HF) - 12 (EL)	Headlight dimmer switch flash	Below 1 Ω
  16 (HL) - 12 (EL)	Headlight dimmer switch low beam	Below 1 Ω
  11 (HU) - 12 (EL)	Headlight dimmer switch hi beam	Below 1 Ω

• HINT:

• Perform the "LOW BEAM" and "HI BEAM" inspection with the light control switch on "HEAD".

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  14 (CR) - 12 (EL)	Turn signal switch right turn	Below 1 Ω
  13 (TR) - 12 (EL)
  13 (TR) - 12 (EL)	Turn signal switch right lane change	Below 1 Ω
  14 (CR) - 12 (EL)	Turn signal switch neutral	10 kΩ or higher
  13 (TR) - 12 (EL)
  15 (TL) - 12 (EL)
  15 (TL) - 12 (EL)	Turn signal switch left lane change	Below 1 Ω
  14 (CR) - 12 (EL)	Turn signal switch left turn	Below 1 Ω
  15 (TL) - 12 (EL)

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  4 (BFG) - 3 (LFG)	Front fog light switch off	10 kΩ or higher
  4 (BFG) - 3 (LFG)	Front fog light switch on	Below 1 Ω

If the result is not as specified, replace the switch assembly.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  11 (H) - 19 (EL)	Light control switch off	10 kΩ or higher
  13 (T) - 19 (EL)
  13 (T) - 19 (EL)	Light control switch tail	Below 1 Ω
  13 (T) - 19 (EL)	Light control switch head	Below 1 Ω
  11 (H) - 19 (EL)

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  14 (HF) - 19 (EL)	Headlight dimmer switch flash	Below 1 Ω
  15 (HL) - 19 (EL)	Headlight dimmer switch low beam	Below 1 Ω
  20 (HU) - 19 (EL)	Headlight dimmer switch hi beam	Below 1 Ω

• HINT:

• Perform the "LOW BEAM" and "HI BEAM" inspection with the light control switch on "HEAD".

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  17 (CR) - 19 (EL)	Turn signal switch right turn	Below 1 Ω
  16 (TR) - 19 (EL)
  16 (TR) - 19 (EL)	Turn signal switch right lane change	Below 1 Ω
  17 (CR) - 19 (EL)	Turn signal switch neutral	10 kΩ or higher
  16 (TR) - 19 (EL)
  18 (TL) - 19 (EL)
  18 (TL) - 19 (EL)	Turn signal switch left lane change	Below 1 Ω
  17 (CR) - 19 (EL)	Turn signal switch left turn	Below 1 Ω
  18 (TL) - 19 (EL)

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  7 (BFG) - 8 (LFG)	Front fog light switch off	10 kΩ or higher
  7 (BFG) - 8 (LFG)	Front fog light switch on	Below 1 Ω

If the result is not as specified, replace the switch assembly.