Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT

HEADLIGHT ASSEMBLY (for Halogen Headlight) - DISASSEMBLY

  • HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. REMOVE NO. 1 HEADLIGHT COVER (w/ Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Turn the No. 1 headlight cover in the direction indicated by the arrow in the illustration and remove the No. 1 headlight cover.

2. REMOVE HEADLIGHT GASKET (w/ Projector Headlight)

Remove the headlight gasket from the No. 1 headlight cover.

3. REMOVE NO. 2 HEADLIGHT BULB (w/ Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Disconnect the connector.

Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

  • NOTICE:
  • Do not touch the glass part of the No. 2 headlight bulb.
4. REMOVE NO. 1 HEADLIGHT BULB (w/ Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Disconnect the connector.

Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

  • NOTICE:
  • Do not touch the No. 1 headlight bulb glass.
5. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/ Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

Remove the front turn signal light bulb from the socket.

6. REMOVE HEADLIGHT LEVELING MOTOR LH (w/ Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Disconnect the connector.

Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.

Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.

Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.

7. REMOVE NO. 1 HEADLIGHT BULB (w/o Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb.

  • NOTICE:
  • Do not touch the glass part of the No. 1 headlight bulb.
8. REMOVE NO. 2 HEADLIGHT BULB (w/o Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb.

  • NOTICE:
  • Do not touch the glass part of the No. 2 headlight bulb.
9. REMOVE FRONT TURN SIGNAL LIGHT BULB (w/o Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

Remove the front turn signal light bulb from the socket.

10. REMOVE CLEARANCE LIGHT BULB (w/o Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Turn the socket in the direction indicated by the arrow in the illustration and remove the socket.

Remove the clearance light bulb from the socket.

11. REMOVE HEADLIGHT LEVELING MOTOR LH (w/o Projector Headlight)
Headlight Assembly (For Halogen Headlight) - Disassembly. LIGHTING EXT. Land Cruiser URJ200  URJ202 GRJ200 VDJ200

Disconnect the connector.

Turn the motor in the direction indicated by the arrow (1) in the illustration to disconnect it.

Turn the aiming screw in the direction indicated by the arrow (2) in the illustration to disconnect the shaft.

Pull the headlight leveling motor LH in the direction indicated by the arrow (3) in the illustration to remove it.