Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM
GRAPHIC DECAL - REMOVAL
- HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. REMOVE FENDER STRIPE LH |
- HINT:
- When removing the fender stripe LH, heat the vehicle body and fender stripe LH using a heat light.
- Standard:
Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Fender Stripe LH 20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body and fender stripe LH excessively.
Using a heat light, heat the vehicle body and fender stripe LH.
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
- HINT:
- For snorkel-equipped vehicles, there is no fender stripe RH.
| *A | for Type A | *B | for Type B |
| 2. REMOVE FRONT DOOR STRIPE LH |
- HINT:
- When removing the front door stripe LH, heat the vehicle body and front door stripe LH using a heat light.
- Standard:
Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Front Door Stripe LH 20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body and front door stripe LH excessively.
Using a heat light, heat the vehicle body and front door stripe LH.
Pull back an edge of the front door stripe LH and pull it parallel to the vehicle body to remove it.
| *A | for Type A | *B | for Type B |
| 3. REMOVE REAR DOOR OUTSIDE STRIPE LH |
- HINT:
- When removing the rear door outside stripe LH, heat the vehicle body and rear door outside stripe LH using a heat light.
- Standard:
Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Rear Door Outside Stripe LH 20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body and rear door outside stripe LH excessively.
Using a heat light, heat the vehicle body and rear door outside stripe LH.
Pull back an edge of the rear door outside stripe LH and pull it parallel to the vehicle body to remove it.
| *A | for Type A | *B | for Type B |
| 4. REMOVE FRONT QUARTER STRIPE LH |
- HINT:
- When removing the front quarter stripe LH, heat the vehicle body and front quarter stripe LH using a heat light.
- Standard:
Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Front Quarter Stripe LH 20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body and front quarter stripe LH excessively.
Using a heat light, heat the vehicle body and front quarter stripe LH.
Pull back an edge of the front quarter stripe LH and pull it parallel to the vehicle body to remove it.
| *A | for Type A | *B | for Type B |