INSPECT FRONT DOOR

ADJUST FRONT DOOR

Check that the clearance measurements of areas A to O are within the standard range.

• Standard Measurement:

• Area	Measurement	Area	Measurement
  A	2.2 to 5.2 mm (0.087 to 0.205 in.)	I	3.5 to 6.5 mm (0.138 to 0.256 in.)
  B	-1.5 to 1.5 mm (-0.0591 to 0.0591 in.)	J	2.5 to 5.5 mm (0.0984 to 0.217 in.)
  C	3.3 to 6.3 mm (0.130 to 0.248 in.)	K	-1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
  D	6.0 to 9.0 mm (0.236 to 0.354 in.)	L	2.5 to 5.5 mm (0.0984 to 0.217 in.)
  E	3.4 to 6.4 mm (0.134 to 0.252 in.)	M	-1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
  F	6.9 to 9.9 mm (0.272 to 0.390 in.)	N	2.2 to 5.2 mm (0.0866 to 0.205 in.)
  G	3.4 to 6.4 mm (0.134 to 0.252 in.)	O	-1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
  H	6.6 to 9.6 mm (0.260 to 0.378 in.)	-	-

Disconnect the cable from the negative (-) battery terminal.

• CAUTION:

• Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

• NOTICE:

• When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().

Using SST, loosen the body hinge bolts and adjust the door position.

• SST
• 09812-00010

Using SST, tighten the body hinge bolts after the adjustment.

• Torque:
• 26 N*m{ 265 kgf*cm, 19 ft.*lbf}

Loosen the door hinge bolts and adjust the door position.

Tighten the door hinge bolts after the adjustment.

• Torque:
• 26 N*m{ 265 kgf*cm, 19 ft.*lbf}

Using a screwdriver, detach the 4 claws and remove the cover.

• HINT:

• Tape the screwdriver tip before use.

Using a T40 "TORX" socket, adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic-faced hammer.

Using a T40 "TORX" socket, tighten the striker mounting screws after the adjustment.

• Torque:
• 23 N*m{ 235 kgf*cm, 17 ft.*lbf}

Attach the 4 claws to install the cover.

Connect the cable to the negative (-) battery terminal.

• NOTICE:

• When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().

Check the SRS warning light ().