Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT
DTC B2452 Height Control Sensor Data Out of Range When Initializing
DESCRIPTION
The headlight leveling ECU*1 or headlight swivel ECU*2 stores this DTC if the sensor value received from the rear height control sensor LH is out of range when performing initialization of the headlight leveling ECU*1 or headlight swivel ECU*2; for example, the vehicle is not level or is being jacked up.
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
DTC Code | DTC Detection Condition | Trouble Area |
B2452 | The sensor value received from the rear height control sensor LH is out of range when performing initialization. | Vehicle condition when initializing Headlight leveling ECU assembly (w/ Static Headlight Auto Leveling) Headlight swivel ECU assembly (w/ Dynamic Headlight Auto Leveling) |
INSPECTION PROCEDURE
- NOTICE:
- After replacing the headlight leveling ECU*1 or headlight swivel ECU*2, initialization of the ECU is necessary ().
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
1.PERFORM INITIALIZATION |
Perform initialization of the headlight leveling ECU*1 or headlight swivel ECU*2 ().
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
- HINT:
Before initializing, make sure that the vehicle condition is proper for initialization.
Be sure to perform the initialization as instructed.
NEXT | |
2.CHECK FOR DTC |
Check for DTCs ().
- OK:
- DTC B2452 output does not occur.
Result | Proceed to |
OK | A |
NG (w/ Static Headlight Auto Leveling) | B |
NG (w/ Dynamic Headlight Auto Leveling) (for LHD) | C |
NG (w/ Dynamic Headlight Auto Leveling) (for RHD) | D |
- HINT:
- If the headlight leveling ECU*1 or headlight swivel ECU*2 stores DTC B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the headlight leveling ECU*1 or headlight swivel ECU*2.
*1: w/ Static Headlight Auto Leveling
*2: w/ Dynamic Headlight Auto Leveling
|
| ||||
|
| ||||
|
| ||||
A | ||
|