Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WINDOW / GLASS
PERFORM INITIALIZATION (APPLICABLE LOCATION)
DTC B2313 Glass Position Initialization Incomplete
DESCRIPTION
The power window regulator motor assembly is driven by operating the power window switch. The power window regulator motor assembly has motor, regulator and ECU functions.
When the ECU determines that the power window regulator motor has not been initialized, DTC B2313 is stored.
- HINT:
- This DTC may be stored for all the windows.
- NOTICE:
When the power window regulator motor is reinstalled or replaced, the power window control system must be initialized.
After a door glass or a door glass run has been replaced, the jam protection function may operate unexpectedly when the auto up function is used. In such cases, the auto up function can be resumed by repeating the following operation at least 5 times:
Close the power window by fully pulling up the power window switch and holding it in the auto up position.
Open the power window by fully pushing down the switch.
| DTC Code | DTC Detection Condition | Trouble Area |
| B2313 | The power window regulator motor is not initialized. The power window regulator motor malfunctions. | Front power window regulator motor assembly LH (for LHD) Front power window regulator motor assembly RH (for RHD) |
INSPECTION PROCEDURE
| 1.PERFORM INITIALIZATION (APPLICABLE LOCATION) |
Initialize the power window regulator motor ().
| NEXT | |
| 2.CHECK FOR DTC |
Check for DTCs ().
| Result | Proceed to |
| B2313 is not output | A |
| B2313 output from front power window regulator motor LH (for LHD) | B |
| B2313 output from front power window regulator motor RH (for RHD) | C |
|
| ||||
|
| ||||
| A | ||
| ||