Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM

BACK DOOR GARNISH (w/o Tire Carrier) - INSTALLATION

  • HINT:
  • When installing the back door garnish, heat the vehicle body and back door garnish using a heat light.
  • Standard Heating Temperature:
  • ItemTemperature
    Back Door Garnish20 to 30°C (68 to 86°F)
    Vehicle Body40 to 60°C (104 to 140°F)
  • NOTICE:
  • Do not heat the back door garnish and vehicle body excessively.
1. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE

Clean the vehicle body surface.

Using a heat light, heat the vehicle body surface.

Remove the double-sided tape from the vehicle body surface.

Wipe off any tape adhesive residue with cleaner.

Install a new back door garnish.

Using a heat light, heat a new back door garnish and the vehicle body surface.

Remove the peeling paper from the face of the back door garnish.

  • HINT:
  • After removing the peeling paper, keep the exposed adhesive free from foreign matter.

Attach the 4 clips and double-sided tape to install the back door garnish.

  • HINT:
  • Press the back door garnish firmly to install it.

Back Door Garnish (W/O Tire Carrier) - Installation. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

EXTERIOR PANELS / TRIM
Land Cruiser URJ200 URJ202 GRJ200 VDJ200
BACK DOOR GARNISH w/o Tire Carrier