BACK DOOR GARNISH (for Double Swing Out Type) - REASSEMBLY

1. INSTALL LICENSE PLATE LIGHT ASSEMBLY

Attach the 2 guides and install the 2 license plate light assemblies.

Install the 2 screws.

2. INSTALL REAR LICENSE LIGHT COVER

Attach the 9 claws to install the rear license light cover to the back door outside garnish.

3. INSTALL BACK DOOR OUTSIDE GARNISH

Install the back door outside garnish to the back door No. 2 outside garnish with the 3 screws.

4. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR

When installing the back door outside garnish protector, heat the back door outside garnish surface using a heat light.

Clean the back door outside garnish sub-assembly surface.

Using a heat light, heat the back door outside garnish sub-assembly surface.

Remove the double-sided tape from the back door outside garnish sub-assembly surface.

Wipe off any tape adhesive residue with cleaner.

Install a new back door outside garnish protector as shown in the illustration.

5. INSTALL SYMBOL EMBLEM

When installing the symbol emblem, heat the vehicle body and symbol emblem using a heat light.

Standard:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Symbol Emblem 20 to 30°C (68 to 86°F)

Clean the vehicle body surface.

Using a heat light, heat the vehicle body surface.

Remove the double-sided tape from the vehicle body.

Wipe off any tape adhesive residue with cleaner.

Install a new symbol emblem.

Using a heat light, heat the vehicle body and a new symbol emblem.

Remove the peeling paper from the face of the symbol emblem.

After removing the peeling paper, keep the exposed adhesive free from foreign matter.

Align the boss positions and install the symbol emblem.

Text in Illustration
*1	Boss

Item	Temperature
Back Door Outside Garnish Sub-assembly	20 to 30°C (68 to 86°F)