Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - TIRE PRESSURE MONITORING
TIRE PRESSURE WARNING RECEIVER - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH |
w/o Sliding Roof: ()
w/ Sliding Roof: ()
| 4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER |
Remove the bolt.
Detach the guide and clamp to remove the tire pressure warning ECU and receiver.
| *a | Guide |
| *b | Clamp |
Disconnect the connector from the tire pressure warning ECU and receiver.