Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - STEERING COLUMN
STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column) - INSPECTION
| 1. INSPECT STEERING COLUMN ASSEMBLY (w/ Entry and Start System) |
Measure the length of the steering main shaft.
- Standard length:
- 573 mm (1.88 ft.)
| 2. INSPECT STEERING COLUMN ASSEMBLY (w/o Entry and Start System) |
Inspect the collar.
Check that the 2 collars are securely installed to the steering column assembly.
If the bushings are missing or damaged, replace the steering column assembly with a new one.
Check the 2 bushings for deformation and damage.
If the bushings are deformed or damaged, replace the steering column assembly with a new one.
Inspect the capsules.
Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.
- Standard Dimension (A):
- 10 mm (0.394 in.)
If the capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.
Check the 2 capsules for deformation and damage.
If the capsules are not positioned as specified, replace the break away capsule and break away collar, break away bracket with a new one.