Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE STARTING
STARTER - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH |
()
| 4. REMOVE STARTER COVER |
Remove the 3 bolts and starter cover.
| 5. REMOVE STARTER ASSEMBLY |
Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.
Remove the flywheel housing side cover.