Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE LUBRICATION
OIL PRESSURE SENSOR - REMOVAL
| 1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Remove the 3 bolts and screw.
Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.
| 2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
Remove the 3 bolts and 2 screws.
Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.
| 3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 10 bolts and No. 1 engine under cover sub-assembly.
| 4. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY |
Disconnect the oil pressure sender gauge connector.
Remove the oil pressure sender gauge.