Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - CRUISE CONTROL
MILLIMETER WAVE RADAR SENSOR - REMOVAL
| 1. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 7 clips and radiator support seal.
| 2. REMOVE RADIATOR GRILLE ASSEMBLY |
Put protective tape around the radiator grille assembly.
| *1 | Protective Tape |
Remove the 3 screws.
Detach the 2 clips and 8 claws, and remove the radiator grille assembly.
w/ Wide View Front Monitor System:
Disconnect the connector.
| 3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
Disconnect the sensor connector.
Remove the 3 bolts and sensor.