Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE ENGINE MECHANICAL
FRONT CRANKSHAFT OIL SEAL - INSTALLATION
| 1. INSTALL FRONT CRANKSHAFT OIL SEAL |
Apply MP grease to the lip of a new front crankshaft oil seal.
- NOTICE:
Do not allow foreign matter to contact the lip of the oil seal.
Do not allow MP grease to contact the dust seal.
Using SST and a hammer, tap in the front crankshaft oil seal to a depth between 0 and 1.0 mm (0 to 0.0394 in.) from the timing chain cover edge.
- SST
- 09223-22010
09506-35010
- NOTICE:
Keep the lip free from foreign matter.
Do not tap the front crankshaft oil seal at an angle.
| 2. INSTALL CRANKSHAFT TIMING GEAR KEY |
Install the crankshaft timing gear key to the crankshaft.
| 3. INSTALL CRANKSHAFT PULLEY |
Align the key groove of the pulley with the pulley set key, and slide on the pulley to install it.
Using SST, install the pulley set bolt.
- SST
- 09213-70011
09330-00021
- Torque:
- 300 N*m{ 3059 kgf*cm, 221 ft.*lbf}
| *a | Hold |
 | Turn |
| 4. INSTALL RADIATOR ASSEMBLY |
()