Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE INTAKE / EXHAUST
EXHAUST PIPE - REMOVAL
| 1. REMOVE PROPELLER SHAFT HEAT INSULATOR |
Remove the 2 bolts and insulator.
| 2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
Disconnect the heated oxygen sensor connector.
Using SST, remove the heated oxygen sensor from the front No. 2 exhaust pipe.
- SST
- 09224-00010
| 3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
Detach the clamp and disconnect the heated oxygen sensor connector.
Using SST, remove the heated oxygen sensor from the front exhaust pipe.
- SST
- 09224-00010
| 4. REMOVE TAILPIPE ASSEMBLY |
Remove the bolt and exhaust tailpipe clamp.
Remove the 2 exhaust pipe supports, gasket and tailpipe.
| 5. REMOVE EXHAUST PIPE DAMPER |
Remove the 2 bolts, exhaust pipe damper and No. 4 exhaust pipe upper protector from the tailpipe.
| 6. REMOVE CENTER EXHAUST PIPE ASSEMBLY |
Remove the 4 bolts and disconnect the center exhaust pipe.
Remove the 3 exhaust pipe supports, 2 gaskets and center exhaust pipe.
| 7. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
Remove the 2 nuts and front No. 2 exhaust pipe.
Remove the gasket.
| 8. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the 2 nuts and front exhaust pipe.
Remove the gasket.