Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE CONTROL
CAMSHAFT POSITION SENSOR - REMOVAL
| 1. REMOVE V-BANK COVER |
Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
| *1 | Pin |
| *2 | Hook |
| 2. REMOVE NO. 1 AIR CLEANER HOSE |
Disconnect the No. 2 PCV hose and vacuum hose.
Remove the bolt and loosen the 2 hose clamps.
Remove the No. 1 air cleaner hose.
| 3. REMOVE VVT SENSOR (for Intake Side of Bank 1) |
Disconnect the VVT sensor connector.
Remove the bolt and VVT sensor.
| 4. REMOVE VVT SENSOR (for Exhaust Side of Bank 1) |
Disconnect the VVT sensor connector.
Remove the bolt and VVT sensor.
| 5. REMOVE VVT SENSOR (for Intake Side of Bank 2) |
Disconnect the VVT sensor connector.
Remove the bolt and VVT sensor.
| 6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2) |
Disconnect the VVT sensor connector.
Remove the bolt and VVT sensor.