INSTALL CAMSHAFT POSITION SENSOR

INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)

Apply a light coat of engine oil to the O-ring.

• NOTICE:

• When reusing the sensor, inspect the O-ring.

• If the O-ring has scratches or cuts, replace the sensor.

Install the sensor with the bolt.

• Torque:
• 5.0 N*m{ 51 kgf*cm, 44 in.*lbf}

Connect the sensor connector.

Install the engine cover with the 2 nuts.

• Torque:
• 8.0 N*m{ 82 kgf*cm, 71 in.*lbf}