INSTALL NO. 2 EMISSION CONTROL VALVE SET

INSTALL NO. 2 AIR TUBE

INSTALL PURGE VSV

Install the No. 2 emission control valve set with the 3 nuts.

• Torque:
• 21 N*m{ 214 kgf*cm, 15 ft.*lbf}

Align the paint mark with the rib and connect the No. 1 air hose.

• HINT:

• Make sure the direction of the hose clamp is as shown in the illustration.

Connect the No. 2 emission control valve set connector.

Install 2 new gaskets.

• NOTICE:

• Make sure the gasket's claws are not caught between the No. 2 emission control valve set and No. 2 air tube.

Install the No. 2 air tube with the 2 bolts and 2 nuts.

• Torque:
• 10 N*m{ 102 kgf*cm, 7 ft.*lbf}

Install the purge VSV ().