Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE EMISSION CONTROL
AIR SWITCHING VALVE (for Bank 1) - REMOVAL
| 1. REMOVE V-BANK COVER |
Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
| *1 | Pin |
| *2 | Hook |
| 2. REMOVE AIR CLEANER CAP AND HOSE |
Remove the air cleaner cap and hose.
Disconnect the mass air flow meter connector, vacuum hose and ventilation hose and detach the clamp.
Loosen the clamp.
Unfasten the 4 hook clamps, and then remove the bolt and the air cleaner cap and hose.
| 3. REMOVE AIR TUBE |
Remove the 2 bolts, 2 nuts and air tube.
Remove the 2 gaskets.
- NOTICE:
- Be careful not to damage the installation surface of the gaskets.
| 4. REMOVE NO. 1 EMISSION CONTROL VALVE SET |
Disconnect the No. 1 emission control valve set connector.
Disconnect the No. 1 air hose from the No. 1 emission control valve set.
Remove the 3 nuts and No. 1 emission control valve set.